[root] Mobile ODIN Pro v3.56

[root] Mobile ODIN Pro v3.56

Requirements: Android version 2.1 and higher

Overview: Mobile ODIN - Full firmware flashing straight from the device itself!

Image



Mobile ODIN is the on-device firmware flasher of choice. Just throw those firmware files on your (internal or external) SD card, start Mobile ODIN and flash away.



!!! Your device must be rooted to be able to use Mobile ODIN. Check the list below to see if your device is supported !!!



If you use the EverRoot option, Mobile ODIN will root the firmware while you flash it. Checking out that new leaked firmware? No reason to lose root!



Currently supported devices:

- Samsung Galaxy S GT-I9000/B/M

- Samsung Galaxy S GT-I9003/L

- AT&T/Rogers Captivate SGH-I896/I897

- Samsung Galaxy S2 GT-I9100/T/G/m

- Samsung Galaxy S2 SHW-M250S/K

- Samsung Galaxy S2 SC-02C

- AT&T Galaxy S2 SGH-I777

- Sprint Epic 4G Touch SPH-D710

- US Cellular Galaxy S2 SCH-R760

- Samsung Galaxy S3 GT-I9300/T

- Samsung Galaxy S3 GT-I9308

- AT&T/Canadia Galaxy S3 SGH-I747/M

- TMOUS Galaxy S3 SGH-T999

- Sprint Galaxy S3 SPH-L710

- VZW Galaxy S3 SCH-I535 (unlock bootloader !)

- US Cellular Galaxy S3 SCH-R530

- Samsung Galaxy S3 LTE SHV-E210S

- Samsung Galaxy S3 LTE GT-I9305

- Google Galaxy Nexus (GSM) Maguro/Yakju/GT-I9250

- Google Galaxy Nexus (CDMA/LTE) Toro/Mysid/SCH-I515 (no cdma radio flashing)

- Samsung Galaxy Note GT-N7000

- Samsung Galaxy Note GT-I9220

- Samsung Galaxy Note GT-N7000B

- Samsung Galaxy Note 2 GT-N7100

- Samsung Galaxy Note 2 LTE GT-N7105

- Samsung Galaxy Note 10.1" GT-N8000

- Samsung Galaxy Note 10.1" Wi-Fi GT-N8010/N8013

- Samsung Galaxy Tab 7" GT-P1000

- Samsung Galaxy Tab 7.0 Plus GT-P6200

- Samsung Galaxy Tab 7.0 Plus Wi-Fi GT-P6210

- Samsung Galaxy Tab 7.0 Plus GT-P6200L

- Samsung Galaxy Tab 7.7" GT-P6800

- Samsung Galaxy Tab 7.7" Wi-Fi GT-P6810

- Samsung Galaxy Tab 10.1" GT-P7500

- Samsung Galaxy Tab 10.1" Wi-Fi GT-P7510

- Samsung Galaxy Tab 2 7" GT-P3100

- Samsung Galaxy Tab 2 7" Wi-Fi GT-P3110/P3113

- Samsung Galaxy Tab 2 10" GT-P5100

- Samsung Galaxy Tab 2 10" Wi-Fi GT-P5110/P5113

- Samsung Galaxy 5 GT-I5500/B/L/T/M

- Samsung Galaxy 5 GT-I5503/T

- Samsung Galaxy 5 GT-I5508



More devices to come!



Flashing with Mobile ODIN does NOT increase your custom kernel flash counter or make the yellow warning triangle appear.



For discussion, check out the forum thread on XDA-Developers.com: http://forum.xda-developers.com/showthread.php?t=1347899



----- MANUAL -----



Flashing with Mobile ODIN is easy. You start off by starting the app. The app will check your system has everything the app needs to continue (like root). It may need to download an additional package, so it is advised you have Wi-Fi available.



Now you should see the main Mobile ODIN screen. It will list a set of partitions. Clicking a partition will allow you to select a file from your SD card to flash to that partition. Do not worry about selecting the wrong file - Mobile ODIN will not let you. Separate files (named after the partition) as well as .tar and .tar.md5 files are supported.



From the desktop ODIN you may be used to "PDA", "PHONE", and "CSC" buttons. All three of these buttons have been replaced by the "Open file ..." button. This button will open the file you select from the SD card, and find all the partitions it can flash inside that file. So if you select a .tar file containing kernel and modem, the Kernel and Modem partitions will be set up to use that .tar file for flashing.



Now that we have selected what we want to flash, if you have the Pro version you can proceed to the EverRoot section. The EverRoot options allows you to root your firmware while it is being flashed. Never again will you be without root! Select here which apps you want to inject in the firmware that is being flashed.



Now that we are all done selecting partitions and configuring EverRoot, we continue to "Flash firmware". Mobile ODIN will gather all the information it needs and perform the flash. Before starting, however, it will check that your battery level is over 50%, and if applicable offer to verify MD5 checksums on the files you have selected to flash. If all is well, it will reboot into recovery mode, and flash the firmware you have selected.



----- DEVICE SUPPORT -----



See the forum thread on XDA-Developers.com ( http://forum.xda-developers.com/showthread.php?t=1347899 ) for more information on how to get your device supported.



What's in this version:

- Added: ACRA crash reporting

- Added: Generic filesystem warnings if storage's filesystem is unsupported

- Fixed: exFAT support on S3, Note2 and Note10.1

- Fixed: Native code performance

- Fixed: Flicker when AROMA installer is used

- Added: Support for:

--- AT&T/Canada Galaxy Note 2 SGH-I317/M

--- TMOUS Galaxy Note 2 SGH-T889

--- Sprint Galaxy Note 2 SPH-L900

--- US Cellular Galaxy Note 2 SCH-R950



This app has NO advertisements



More Info:


Code:

https://play.google.com/store/apps/details?id=eu.chainfire.mobileodin.pro




Download Instructions:

http://ul.to/vvo01tes



Mirror:

http://www.filedownloads.org/gbfron5of2f4

http://rapidgator.net/file/55869947/ics ... o.apk.html

infinitely — Tue Nov 13, 2012 2:07 pm


Related Posts Plugin for WordPress, Blogger...